Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable General Contractor Across Bloomingdale
Finding a general contractor in Bloomingdale, FL who handles permits, HOA approvals, and coastal building codes without turning your kitchen or addition into a six-month headache is harder than it should be. We’re Elmstead Remodeling Tampa, and we’ve built our reputation in Bloomingdale on a simple promise: a written price before any work starts, materials you can research by name, and a 365-Day Done Right Promise on every project. If it’s not done right, we make it right. Call us at (850) 779-4017 and a live person answers, 24/7.
Why Elmstead Remodeling Tampa Is Bloomingdale’s Preferred General Contractor Company
Salt air near Florida’s Gulf Coast decides which materials survive. That’s the spine of how we build here. On a cul-de-sac off Bloomingdale Avenue, we replaced a 1990s stucco home’s original galvanized roof fasteners after a windstorm peeled back a corner. Our crew hot-dip galvanized every strap and specified stainless collar ties, then flashed the new impact-rated windows with marine-grade butyl tape before closing the walls. That’s the difference between a repair that lasts three years and one that lasts thirty.
Every project we run in Bloomingdale carries the Cedarwell Care Promise: shoe covers and drop cloths inside the house, a written price before any work starts, a photo of the clean-up before the crew leaves, quiet tools during family rest hours where possible, and pet-safe product choices where available. Graham Stein, who leads our team, signs off on that promise for every job. Families with kids and pets don’t have to worry about who’s walking through the door. Our technicians are background-checked and uniformed, and they ask before moving anything.
Styles & brands we work with
Remodeling Contractor in Bloomingdale
A Remodeling Contractor in Bloomingdale coordinates the trades, materials, permits, and inspections for kitchen, bath, and whole-home projects, and the work typically runs $14,000 – $45,000 for a kitchen remodel, $9,000 – $28,000 for a bathroom remodel, and $45,000 – $130,000 for a home addition. Bloomingdale’s housing stock is mostly single-family block construction with stucco exteriors built from the 1980s onward, so our crews know exactly what’s behind those walls before the first cut.
Kitchen Remodel
A Bloomingdale kitchen remodel usually starts at $14,000 and reaches $45,000 depending on cabinet grade, countertop material, and whether we’re moving plumbing. We specify cabinets from KraftMaid and Wellborn, countertops from Cambria, Silestone, and Caesarstone, and fixtures from Kohler, Moen, and Grohe. Those are brands with warranties you can verify independently, and they travel with the finished project.
Bathroom Remodel
Bathroom remodels in Bloomingdale run $9,000 – $28,000, with smaller baths starting around $5,000. We use Schluter waterproofing systems behind every tile surface because the humidity here punishes shortcuts. A walk-in shower installation runs $4,500 – $12,000, and a tub-to-shower conversion sits between $3,500 and $10,000.
Whole Home Remodel
Whole-home remodels in Bloomingdale are where the written price matters most. These projects stretch across months, and families need certainty about what the finished job costs. We give you that number before any work starts, every time.
Licensed General Contractor in Bloomingdale
A Licensed General Contractor in Bloomingdale manages the full scope of a construction project: permits, structural work, subcontractors, inspections, and the final walkthrough. For new construction and larger additions, Bloomingdale’s rapid suburban expansion on Florida’s Gulf Coast means everything must meet stringent wind-load and flood-plain requirements. Storm-hardening and elevation compliance are not optional add-ons here; they’re the foundation of every compliant project.
Room Addition
Room additions in Bloomingdale typically run $45,000 – $130,000. What drives cost here isn’t square footage alone. It’s hurricane straps, tie-downs, impact-rated windows, and elevation work if the addition sits near a flood plain. We navigate the county permit process alongside HOA approvals so both move forward at the same time.
Garage Conversion
Garage conversions in Bloomingdale run $30,000 – $80,000. Many subdivisions have deed restrictions requiring specific roof colors and exterior finishes, so we pull HOA approval documents before we submit the permit packet. No surprises at the architectural review board, and no change orders because someone forgot the right stucco color.
Deck Construction
We build decks in Bloomingdale with hot-dip galvanized or stainless hardware only. Standard zinc-coated fasteners fail early in salt air. The price for that upgrade is modest, and it’s the difference between a deck that stays sound and one that develops rust blooms in three years.
Trusted Brands We Service in Bloomingdale
We stock and specify materials from Mr-Glass, Therma-Tru, and ViewLux because Bloomingdale homeowners deserve to research exactly what’s going into their homes. Mr-Glass impact-rated glazing handles wind-load requirements without looking institutional. Therma-Tru entry doors resist the humidity and salt air that warp cheaper units. ViewLux windows carry ratings that satisfy coastal building codes and HOA finish requirements. When you know the brand, you can verify the warranty yourself. That transparency is part of how we write every project proposal.
See the difference
Before
After
Before
After
Before
AfterCommon General Contractor Problems We See in Bloomingdale Homes
- Rusted drywall screws on exterior stucco lath. Interior-grade drywall screws corrode within two years in Bloomingdale’s salt air, and the stucco cracks and falls off in chunks. We specify stainless or hot-dip galvanized lath fasteners on every exterior repair.
- Aluminum fence posts corroding at the base. Standard aluminum posts set directly into concrete develop white corrosion blooms within 18 months. We isolate posts from concrete with proper sleeves and specify marine-grade coatings.
- Paver joints washing out in summer rains. Bloomingdale’s heavy afternoon thunderstorms strip dry sand from paver joints, leaving pavers to shift and sink under driveway loads. We install sealed joints and a proper drainage base so the surface stays put.
- HOA approval stalls. Many Bloomingdale subdivisions require specific roof colors and exterior finishes. If the contractor doesn’t pull HOA approval alongside the county permit, the project stops dead at the architectural review board. We handle both tracks from day one.
Pricing for General Contractor in Bloomingdale, FL
Here’s what Bloomingdale homeowners can expect to pay when the job is done to coastal spec, not inland spec. The ranges below reflect the fasteners, flashing, frames, and joint fillers that actually survive Florida’s Gulf Coast conditions.
| Project | Coastal-Spec Price Range |
|---|---|
| Roof Replacement (coastal-spec fasteners and underlayment) | $8,000 – $20,000 |
| Impact Window Installation (marine-grade frames and flashing) | $8,000 – $25,000 |
| Paver Driveway Installation (sealed joints and drainage base) | $7,000 – $18,000 |
What pushes a Bloomingdale job to the top of the range? Hurricane straps, tie-downs, impact-rated windows, and elevation work. What pushes it down? Smaller scope, fewer openings, or a project that doesn’t touch the building envelope. The inland-spec version of the job might look $2,000 – $4,000 cheaper up front, but within a decade you’ll pay to replace rusted fasteners, corroded frames, and failed joints. The cheap spec costs more, every time. Call (850) 779-4017 for a written, line-item quote. Estimates are free.
We Also Serve Cities Near Bloomingdale
Our crews travel to Bloomingdale neighborhoods like those along Bloomingdale Avenue, Bell Shoals Road, and the developments near Lithia Springs. We also serve nearby Tampa, St. Petersburg, Clearwater, and Dunedin. If you’re in one of those communities, you’re still getting the same Cedarwell Care Promise and the same written price before any work starts. Learn more about our General Contractor services, or see how we serve General Contractor in Bloomingdale specifically.
Serving Bloomingdale, FL - Our Local Coverage Area
We’re based in the Bloomingdale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About General Contractor in Bloomingdale
Bloomingdale HOA deed restrictions commonly require specific roof colors, exterior finishes, and material types, which means your contractor must pull HOA approval alongside county building permits before any exterior or addition work begins. We submit both tracks on day one so the project doesn’t stall at the architectural review board. Call (850) 779-4017 with your subdivision name and we’ll tell you what we’ve navigated there before.
A coastal-spec roof replacement in Bloomingdale runs $8,000 – $20,000, while an inland-spec version might start a few thousand lower. The difference is in the fasteners, underlayment, and flashing: hot-dip galvanized or stainless instead of standard zinc, and marine-grade butyl tape at every opening. The inland spec fails within a decade in salt air, and you’ll pay to replace it. Call (850) 779-4017 for an exact number on your roof.
Bloomingdale’s heavy summer rains wash dry sand out of paver joints within a single season, leaving pavers to shift and sink under foot and driveway loads. Sealed joints keep water out and pavers locked in place, which is why we include them on every paver installation rather than treating them as an add-on. A paver driveway in Bloomingdale runs $7,000 – $18,000 with sealed joints and a proper drainage base included.
Yes, and that’s how we run every Bloomingdale addition. We pull the county building permit and the HOA architectural review submission in parallel so neither track holds up the other. Room additions in Bloomingdale run $45,000 – $130,000 depending on size, hurricane straps, impact windows, and elevation work. Call (850) 779-4017 to start the process with a free written estimate.
Rusted interior-grade drywall screws on exterior stucco lath are the failure we fix most often on Bloomingdale stucco homes. The salt air corrodes zinc-coated screws within two years, and the stucco cracks and falls away in chunks. We replace them with stainless or hot-dip galvanized fasteners and re-lath the affected area so the repair actually lasts. Call (850) 779-4017 if you’re seeing stucco cracks or rust stains on your exterior walls.
Written by Graham Stein, Owner at Elmstead Remodeling Tampa, serving Bloomingdale, FL.
