Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Kitchen Remodeling Across Bloomingdale
Kitchen remodeling in Bloomingdale typically runs $14,000 to $45,000 for a full project, with smaller kitchens falling between $9,000 and $20,000. What separates one Bloomingdale quote from another usually comes down to what the contractor finds behind the walls, because 1980s and 1990s block homes in this part of Hillsborough County carry a few surprises we have learned to plan for. Graham Stein and our team at Elmstead Remodeling Tampa have opened enough Bloomingdale kitchens to know exactly what those surprises are, and we write them into the contract before the first hammer swings. Call (850) 779-4017 for a free estimate and a written price you can hold us to.
Why Elmstead Remodeling Tampa Is Bloomingdale’s Preferred Kitchen Remodeling Company
Our reputation in Bloomingdale comes from handling the part of a remodel nobody sees until the drywall comes down. We are not the crew that gives you a low number and then tacks on change orders. We are the crew that walks the house first, looks at the panel, checks the headers, and tells you what a permit will trigger before you sign. That is why families in neighborhoods like Bloomingdale Oaks, River Crossing, and Twin Lakes keep our number handy when they are ready to stop renting the kitchen they are in.
Every Bloomingdale project starts with the same promise: a written price before any work starts. Not a range, not a ballpark, not an estimate that grows after the crew arrives. The price we write is the price you approve. If anything changes once we open the walls, you get a written change order with the new number before we touch it. No surprises that hit you at the end of the month.
Our crews are background-checked and uniformed, and they work under the Cedarwell Care Promise. That means shoe covers at the door, drop cloths on every floor path, quiet tools during nap and school hours, and a photo of the clean-up before the crew leaves for the day. Families with kids and pets in Bloomingdale do not have to wonder who is walking through the house or what the kitchen will look like at 5 p.m.
Styles & brands we work with
Countertop Installation in Bloomingdale
Countertop installation in Bloomingdale generally runs $2,000 to $6,500, depending on the material, edge profile, and how much of the old surface has to come out first. For most families here, the countertop decision comes down to how the material handles humidity, citrus, and daily abuse from kids and pets. Quartz from Cambria and Silestone holds up better than natural stone in a humid Gulf Coast kitchen because it never needs sealing and will not absorb a lime juice spill the way a marble top will.
We template every countertop after the cabinets are set, not before. That sequencing matters in Bloomingdale because so many 1980s block homes have walls that are not perfectly square. Template after installation means the slab fits the actual space, not the plan the builder drew forty years ago.
Quartz vs. Granite for Humid Kitchens
Quartz wins most Bloomingdale kitchens because it is non-porous and maintenance-free. Granite is more affordable up front, but it needs sealing before the rainy season and again every year or two. In a kitchen that sees afternoon thunderstorms rolling through six months of the year, a sealed slab is the safer bet.
Undermount Sinks and the Undersized Cabinet Problem
We see a lot of Bloomingdale kitchens where the existing cabinet box was not built to carry the weight of an undermount sink plus a stone top. When we open those, we reinforce the base cabinet with a support frame before the slab goes down. It is a $150 to $400 add that saves a cracked countertop later.
Kitchen Remodeling Company in Bloomingdale
As a kitchen remodeling company working in Bloomingdale, our full remodels start at $14,000 and commonly land between $25,000 and $45,000 once cabinetry, countertops, and the structural upgrades are in. We never lead with a price and hope nobody asks what is in it. We lead with the inspection, because a Bloomingdale kitchen built in 1991 carries different wiring than one finished last year, and the permit officer knows it.
When we open a Bloomingdale kitchen, the two things we check first are the electrical panel and the framing over any opening between the kitchen and the family room. Aluminum branch wiring from the 1980s needs arc-fault breakers and pigtailing to pass a rough-in inspection. Undersized headers need to be recalculated for current wind-load requirements. Both of those are code triggers, not optional upgrades, and we put allowances for them directly into our written price.
Full Project Scope and Written Allowances
Our full kitchen remodels include the layout, the cabinets, the counters, the backsplash, the flooring underfoot, and the fixtures from Kohler, Moen, or Grohe. We also write a code-upgrade allowance into the contract so there is a number attached to the wiring and framing fixes before we find them. That allowance is part of the price, not an asterisk.
Partial Remodels and Cabinet Refacing
Not every Bloomingdale kitchen needs to come down to the studs. Cabinet refacing and partial remodels where the footprint stays put can run $9,000 to $20,000, and they work well when the bones are sound and the family just needs a fresher kitchen. We will tell you honestly which one your house needs after we look at it.
Trusted Brands We Service in Bloomingdale
We install and service cabinets from KraftMaid and Wellborn, and we pair them with hardware and fixtures from brands homeowners can look up themselves: Moen, Kohler, Grohe, Schluter, and James Hardie for any exterior transition work tied to the kitchen. For Bloomingdale customers working through a fence, gate, or outdoor living decision at the same time, we are also familiar with Ameristar and Bufftech product lines, and we can coordinate those scopes without juggling a second contractor. If a manufacturer has a warranty on the product, you get it in writing with the finished kitchen, and our 365-Day Done Right Promise covers the workmanship behind it.
Common Kitchen Remodeling Problems We See in Bloomingdale Homes
- Aluminum branch wiring hiding behind 1980s drywall. Many Bloomingdale kitchens built before 1990 still have aluminum wiring, and a rough-in inspection will not pass without arc-fault breakers and proper pigtailing at every junction. We budget for this in the allowance line, not as a surprise after demo.
- Undersized load-bearing headers over wide openings. A wall that was fine for a 36-inch pass-through is not fine for the 8-foot opening every Bloomingdale family wants between the kitchen and the family room today. Current wind-load standards for Gulf Coast block homes require a beefier beam, and the permit officer will ask for the calcs.
- Moisture damage where the kitchen meets the exterior wall. Afternoon thunderstorms and humid air push water into any gap around window flashing or stucco penetrations. When we open a Bloomingdale kitchen, we check those exterior tie-in points before we close the walls again.
- HOA deed restrictions on finishes and exterior changes. Some Bloomingdale subdivisions have covenants that govern paint colors, roof materials, and even the look of an exterior vent hood. If your kitchen remodel touches anything visible from the street or the roofline, we coordinate the HOA approval alongside the county permit so you are not fixing a violation later.
See the difference
Before
After
Before
After
Before
AfterPricing for Kitchen Remodeling in Bloomingdale, FL
Here are the line-item ranges we quote for Bloomingdale kitchens. These reflect what we actually see across the subdivisions we work here, from River Crossing to the pockets east of Lithia Pinecrest Road.
| Scope | Typical Bloomingdale Range |
|---|---|
| Full Kitchen Remodel | $14,000 – $45,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
What moves the number: whether the electrical panel needs a service upgrade, whether the header over the opening gets recalculated for wind load, and how far the plumbing has to move for the new layout. We give you a written price that includes the allowances for those unknowns before any work starts. Call (850) 779-4017 to schedule your free estimate and get the line items, not just the total.
We Also Serve Cities Near Bloomingdale
Our Kitchen Remodeling team works throughout Bloomingdale and the surrounding communities, including Tampa, St. Petersburg, Clearwater, and Dunedin. If you are just outside Bloomingdale and wondering whether we cover your street, call (850) 779-4017 and ask. A live person answers, 24/7, and they will tell you straight.
Serving Bloomingdale, FL - Our Local Coverage Area
We’re based in the Bloomingdale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Kitchen Remodeling in Bloomingdale
Most Bloomingdale kitchens built before 1990 have aluminum branch wiring, and a rough-in electrical inspection will not pass without arc-fault breakers and pigtailing at the junction points. The permit officer sees the open walls and applies current code, not the code from when the house was built. We put an allowance for this in our written price from day one. Call (850) 779-4017 and we will walk your panel before you commit to anything.
If your remodel changes anything visible from the street, an exterior vent hood location, a window size, or a roofline transition, your Bloomingdale HOA may need to approve it before the county permit gets issued. We handle that coordination for you, and we have done it enough times in subdivisions around Bloomingdale Oaks and River Crossing to know what the architectural review boards actually enforce. The interior kitchen work is yours to decide; the outside pieces get approved first.
The rough-in inspection catches electrical, plumbing, and framing work that is about to be hidden behind drywall. In a Bloomingdale block home, that often means the inspector finds aluminum wiring that needs arc-fault protection, a header that needs a load calculation, or a plumbing run that does not meet the current venting code. We schedule that inspection and do not close a single wall until it passes, because fixing a failed rough-in later means tearing out finished work.
Bloomingdale sits in a subtropical climate where summer thunderstorms roll through most afternoons between June and September. Any exterior work, flashing, venting, or a window replacement tied to the kitchen, needs a dry window to seal properly. We schedule interior work during storm hours and save the exterior tie-ins for the mornings or clear days, which keeps your remodel on schedule instead of fighting the weather.
We stop work, write a change order with the new number, and get your written approval before we change the plan. In one Bloomingdale Oaks kitchen, we opened a 1990s block home and found a load-bearing wall that had been notched for plumbing with no header at all. We installed an LVL beam and hurricane straps, pulled the permit revision, and passed inspection before closing the walls, and the homeowner knew the exact added cost before we ordered the beam. That is how we handle every surprise: written, priced, and approved first.
Ready to Talk About Your Bloomingdale Kitchen?
Call (850) 779-4017 and you will reach a person, not a voicemail tree. We will schedule a free estimate, walk your kitchen with you, and hand you a written price that covers the work and the code upgrades we can already see coming. Graham Stein and the Elmstead Remodeling Tampa team work Bloomingdale every week, and we would rather show you the plan than sell you the dream.
Written by Graham Stein, Owner at Elmstead Remodeling Tampa, serving Bloomingdale families through the Cedarwell Care Promise.
