Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wellborn Bathroom Remodeling: The Tampa Owner’s Guide
Wellborn bathroom remodeling in Tampa typically runs $9,000 to $28,000 installed, depending on whether we’re rebuilding the shower, the vanity wall, or the whole room. If you’re here because a Wellborn cabinet door has swollen at the hinge, a drawer glide gave out, or a vanity side panel has started to pull away from the frame, we can match the replacement part to your original series and have it on order within a day or two. Most owners discover the failure the same way: a door that no longer closes square, a drawer that drags, or finish flaking at the bottom edge where Tampa humidity works its way in.
We stock common Wellborn hinge and glide hardware on our trucks, along with touch-up kits for the most popular door finishes in this area. For a full cabinet box replacement or a complete bathroom overhaul, we write the price down before we start, and we honor that number line by line.
Which Wellborn Models This Applies To
Wellborn builds bathroom cabinetry across several series, and the parts are not universal. A hinge from a Wellborn Estate series cabinet will not match the bore pattern on a Wellborn Premier or Cabinet Select line. The fastest way to identify your model is the label inside the drawer box or on the back of the door: Wellborn stamps the series name, door style number, and finish code there. If the label has faded or was painted over, we measure the hinge cup diameter (35mm is the most common bore) and the overlay to narrow it down.
For Tampa homeowners, the finish code matters more than it does in drier climates. Wellborn’s thermofoil doors hold up better in humid bathrooms than painted MDF, but once water gets behind the edge banding, the delamination spreads quickly. We generally recommend OEM replacement doors or drawer fronts when matching an existing finish is critical. For hardware like hinges, glides, and soft-close dampers, a quality aftermarket equivalent works fine and often arrives faster, but we only use aftermarket hardware that matches the original mounting footprint so no new holes go into your cabinet boxes.
Elmstead Remodeling Tampa is an independent contractor, not affiliated with Wellborn. We buy parts through the same regional distribution network the cabinet shops use, and we also install KraftMaid, Cambria, and Silestone products when a remodel calls for them.
Styles & brands we work with
Signs Your Wellborn Bathroom Remodeling Is Failing
- Door won’t stay closed or sags at the corner. The hinge has worn or the screw holes in the door have stripped out. In Tampa’s humidity, the particleboard core of an older door loses its grip on the hinge screws before the hinge itself fails.
- Drawer drags or tips when pulled out more than halfway. The nylon roller or ball-bearing glide has flat-spotted. On Wellborn vanities from the mid-2000s, the side-mount glide is the first part to go, usually on the drawer that holds the hair dryer and other daily-use items.
- Finish is flaking or bubbling at the bottom edge of the vanity. Water from mopping or from the tub has wicked into the door’s lower seam. Once the edge banding lifts, the panel behind it starts to swell, and that door is typically a replace-not-repair call.
- The soft-close mechanism catches or snaps. The damper inside the hinge cup has failed. Wellborn soft-close hinges are generally reliable for about 12 to 15 years in a daily-use bathroom, though a bathroom that stays damp will wear them faster.
- Side panel is pulling away from the cabinet frame. This is often a water-damaged toe kick or a failing connector rather than a hinge issue. On Wellborn framed cabinetry, the side panels fit tightly against the face frame, so any visible gap means something has moved and should be looked at before the box itself warps.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A Wellborn bathroom remodel in Tampa falls between $9,000 and $28,000 installed. Where your project lands depends mostly on what’s actually being replaced. A single vanity with a new prefinished top runs toward the lower end. A full gut with new Wellborn cabinetry, a tiled shower, relocated plumbing, and new flooring climbs toward the top of the range.
For a simpler parts-level job, here’s what you’re looking at:
- Replacement door or drawer front (OEM Wellborn, matched finish): $120 – $320 per piece, installed
- Hinge or glide replacement on one vanity: $40 – $110 in labor plus the hardware itself, typically $15 – $45 per hinge or glide set
- Complete vanity replacement with top and faucet set: $800 – $3,000 installed, depending on size and whether the shutoff valves need updating
- Full Wellborn bathroom remodel, gut to finish: $9,000 – $28,000, written as a fixed price before the first day of work
Every quote includes the parts, the labor, the haul-away for the old materials, and a written list of what’s covered. We give the price before work starts, and we don’t change it unless you change the scope. The 365-Day Done Right Promise applies: if something we installed isn’t right a month or a season later, we come back and make it right.
DIY or Call Us?
Some Wellborn repairs are genuinely simple. A loose hinge screw can be tightened or re-anchored with a hardwood toothpick and wood glue. A misaligned drawer glide can sometimes be nudged back into its track. Replacing a soft-close damper inside a hinge cup takes about two minutes with a flathead screwdriver, and if you can read the part number off the old hinge, you can order the same one.
Where DIY goes wrong is when an owner tries to remove a swollen door, strips the screws, cracks the hinge cup, and then we’re drilling new holes into a cabinet face that was fine before the repair started. There is no high-tension spring or electrical danger in cabinet work, so the risk here is not injury, it’s turning a $40 hardware fix into a $300 door replacement. If you’re not sure, call us at (850) 779-4017. We’ll tell you over the phone whether it sounds like a two-minute job or something a tech should look at.
FAQs
Wellborn bathroom cabinetry in Tampa typically lasts 15 to 25 years with proper ventilation, though thermofoil doors in a poorly vented bathroom can show edge lifting within 10 to 12 years. The cabinet boxes themselves often outlast the doors and hardware. If the boxes are solid, we can replace doors and glides instead of the whole vanity, which saves thousands and keeps the original footprint.
Yes, most failures we see are repairable. Ligaments, hinges, glides, and soft-close dampers are all replaceable parts, and we can re-anchor stripped screw holes without replacing the door. The line is drawn when water has swollen the panel core or the finish has delaminated across more than a third of the surface. At that point, a matched replacement door from Wellborn costs less than repeatedly patching a failing one. Call (850) 779-4017 and we’ll tell you which side your cabinet falls on.
A hardware-only repair on a Wellborn vanity is done in one visit, usually under two hours from the time the tech walks in until the clean-up photo is taken. A full bathroom remodel in Tampa runs three to six weeks depending on the shower work, the tile, and whether the plumbing moves. We’ll hand you a written schedule with the price, the quiet hours, and the days we’re in your home before the first tool comes off the truck.
We stock common hinge and glide hardware and touch-up kits for the most popular Wellborn door finishes in Tampa, and we carry them on the trucks. For matched doors, drawer fronts, and specialty hardware, we order through the regional distribution network and typically have the part in hand within one to two business days. We write it down before we start so nobody is guessing mid-project, and you’ll know the part cost and the arrival date before you approve anything.
If your Wellborn bathroom cabinet is showing any of the signs above, or if you’re ready to price a full bathroom remodel in Tampa, call Elmstead Remodeling Tampa at (850) 779-4017. Graham does the walkthrough himself, and the written price is yours before any work begins.
Written by Graham Stein, Owner, Elmstead Remodeling Tampa at Elmstead Remodeling Tampa, serving Tampa and nearby areas.
