Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Roofing: The Tampa Owner’s Guide
If you have a Tremron roof in Tampa and something’s failing, here’s the direct answer: we stock Tremron-compatible roofing materials and parts, and most replacements run $400 – $1,800 installed depending on what’s damaged. We can usually diagnose and quote the same day we look at it, often with the fix done within a day or two once parts are confirmed. You’ll notice the problem before we ever show up: a leak after a hard Tampa downpour, a shingle or tile in the yard after a storm, or daylight showing through your attic sheathing. Those are the three calls we get most from Tremron owners in Seminole Heights, Carrollwood, and Davis Islands.
One thing to know up front: Elmstead Remodeling Tampa is an independent contractor. We’re not affiliated with Tremron, and we don’t pretend to be. What we do is match your existing Tremron system honestly, write the price down before work starts, and leave your roof sound and your yard clean.
Which Tremron Models This Applies To
Tremron doesn’t make “roofs” the way GAF or Owens Corning do. Tremron is a hardscape manufacturer, best known in Florida for pavers, retaining wall block, and concrete products. A lot of Tampa homes have Tremron roof pavers or Tremron paver tiles used on flat roof decks, terraces, and Rooftop patios, especially on mid-century and Mediterranean-style homes in neighborhoods like Palma Ceia and Bayshore Beautiful. That’s the Tremron roofing we’re talking about here.
The compatibility gotcha: Tremron roof pavers are sized differently from their ground pavers, and the tolerances matter. Roof deck pavers typically run 16″ x 16″ or 24″ x 24″, and they’re usually thinner than driveway pavers to keep the dead load down on the roof structure. If you swap in a ground paver because it “looks the same,” you’re adding weight the roof wasn’t designed to carry. We’ve seen that mistake in Tampa more than once, and it’s an expensive one to walk back.
When we identify your Tremron part, we check the underside stamp if it’s still legible, measure thickness with a caliper, and match the color lot as closely as the product line allows. For older Tremron roof paver lines that are discontinued, we source quality aftermarket equivalents that match the dimensional profile. For storm-damaged roof deck systems, we also check the pedestal supports and the underlayment, because in Tampa’s heat and humidity, the paver itself is rarely the only thing that’s worn.
Styles & brands we work with
Signs Your Tremron Roofing Is Failing
- Water staining on the ceiling below a roof deck. This usually means the underlayment or a pedestal support has failed, not the paver itself. The paver can look fine while water works its way underneath.
- Pavers shifting or sitting unevenly. On Tampa roof decks, this often traces back to a broken pedestal or degraded shim. Left alone, the wobble stresses the pavers around it and spreads the problem.
- Cracks or spalling on paver surfaces. Florida sun and rain cycles push moisture into the concrete, and when it heats up, the surface pops off. Once spalling starts, the paver’s structural integrity is compromised and water gets in faster.
- Efflorescence or white crust on pavers. That’s salt and mineral migration from repeated wet-dry cycles. It’s not structural on its own, but it tells you the pavers are absorbing water and the surface sealer, if there ever was one, is gone.
- Drainage that’s slower than it used to be. Roof deck pavers sit on a drainage system. If water pools where it didn’t before, the slope or the drainage mat underneath is failing, and that accelerates every other problem on the list.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Tampa, Tremron roof paver replacement and roof deck repair typically runs $400 – $1,800 depending on how many pavers are involved and what’s underneath them. A single cracked paver with a healthy pedestal system might be on the low end. A section of roof deck where the underlayment, pedestals, and pavers all need to come out and go back in properly runs toward the top of that range, sometimes beyond it if the roof structure itself needs work.
Every quote from Elmstead Remodeling Tampa includes the same things: a written line-item price before work starts, the specific Tremron-compatible paver or aftermarket equivalent we’re using, labor, and clean-up. We don’t give you a number on the phone and then “discover” more once the roof is open. The price we write down is the price you pay, unless you ask us to add scope. Our workmanship carries our 365-Day Done Right Promise: if it’s not done right, we make it right. No fine print, no call-back runaround.
DIY or Call Us?
There are a few things you can safely check yourself. You can see the paver surface condition, note where water pools after rain, and check for visible cracking from a ladder you’re comfortable on. You can also photograph the underside stamps of any loose pavers so we know what we’re matching before we arrive.
What you shouldn’t do is pull pavers off a roof deck and start poking at the pedestal system or underlayment. Roof deck waterproofing is a system. One wrong move pulling a paver or cutting the membrane and you’ve turned a $400 repair into a leak that damages the ceiling below. Same goes for any roofing work near the roof edge: Tampa roof decks on two and three-story homes mean a fall from height is a real risk. Let us put eyes on it. Call (850) 779-4017 and we’ll schedule a time to look, diagnose, and hand you a written quote before anything gets touched.
FAQs
In Tampa’s sun and rain, Tremron roof pavers typically last 15 – 25 years before surface spalling or structural cracking becomes visible. The underlayment and pedestal system under them usually needs attention sooner, often at the 10 – 15 year mark, especially on homes where roof deck drainage isn’t maintained.
Hairline surface cracks can sometimes be sealed, but a paver with a through-crack or spalling is past repair and should be replaced. The concrete has already absorbed moisture and lost structural integrity. Replacing it is cheaper than the water damage it will eventually cause. Call (850) 779-4017 for an honest assessment.
A single paver swap takes under an hour once we’re on the roof. A section replacement with pedestal and underlayment work usually runs one to three days depending on the size of the area and the condition of the roof deck underneath.
We keep common Tremron-compatible roof paver profiles on the truck and maintain relationships with Tampa-area suppliers for the rest. We can also coordinate with other brands you may have on the property, including KraftMaid, Cambria, and Silestone, though those aren’t typically roof-related. If we need to order a discontinued match, we’ll tell you the lead time before you sign anything.
Written by Graham Stein, Owner, Elmstead Remodeling Tampa at Elmstead Remodeling Tampa, serving Tampa and nearby areas.
