Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Oldcastle Driveway & Pavers: The Tampa Owner’s Guide
Oldcastle paver driveway repair and replacement in Tampa typically runs $7,000 – $18,000 for a full installation, and we carry Oldcastle-compatible pavers, edge restraints, and base materials for smaller repair jobs that fall well under that range. Most Tampa homeowners discover a problem the same way: a paver settles after a heavy summer rain, a corner edge cracks under a truck tire, or the sand joints wash out and weeds start pushing through. We match the existing Oldcastle paver’s color, size, and chamfer so the repair blends into the original run, then we give you a written price before any paver comes off the pallet.
Elmstead Remodeling Tampa is an independent contractor, not a distributor for or affiliate of Oldcastle. That said, we install and repair Oldcastle products regularly, and we know which paver lines hold up under Florida’s sun, rain, and sandy soil.
Which Oldcastle Models This Applies To
Oldcastle manufactures pavers under several product lines that show up across Tampa driveways, patios, and pool decks. The most common we see are the Holland Stone series (4″ × 8″ rectangular units in 60mm and 80mm thicknesses), the Cobble system (a tumbled, irregular-edged paver that mimics old street brick), and the Belgard line, which Oldcastle produces under its Belgard brand with paver sizes ranging from small 6″ × 6″ squares to large 16″ × 16″ slabs. If you still have the original project paperwork, the paver name and color are usually listed there. No paperwork? Flip over a loose paver and look for a manufacturer stamp, or measure it: 60mm pavers are for walkways and patios only, while 80mm pavers are the minimum for a vehicle driveway in Tampa’s clay-heavy soils.
The honest compatibility note: Oldcastle color runs change year to year, so a “Sandalwood” paver bought in 2018 will not perfectly match a “Sandalwood” paver from 2024. UV fading in Florida accelerates that shift further. When that happens, we blend by pulling pavers from a less-visible area (like behind a planter or along the garage side) and laying the new pavers there, so the visible driveway stays consistent. It is a small step that most contractors skip because it takes extra time. We do not skip it.
Styles & brands we work with
Signs Your Oldcastle Driveway & Pavers Are Failing
- Sand joints washing out after heavy rain. Tampa’s afternoon downpours move polymeric sand if the joint depth is too shallow or the original install never compacted properly. Re-sanding is a maintenance item, not a failure, but if it happens after every storm, the base is shifting underneath.
- A low spot holding water for more than an hour after rain stops. This points to base settlement or a washed-out sub-base, which happens when a driveway edge isn’t restrained and water gets under the pavers. In Tampa’s sandy loam, water moves fast, and so does the base material once it finds an exit.
- Chipped or cracked paver edges along the driveway perimeter. Vehicles turning at the curb or parking with a tire on the edge put pressure where the edge restraint failed. Without a solid concrete edge or paver restraint, the outside row cracks within a few seasons.
- Weeds or ant colonies pushing up between pavers. Ants love the sand under pavers. Once they excavate, small voids form and pavers start to rock. We use a paver base panel or compacted aggregate with a weed barrier on new installs to keep this from becoming a yearly fight.
- A dip or wave in the paver surface you can feel when driving over it. That is base failure, not a paver problem. Replacing the paver without fixing the base means the same dip comes back in under two years. We fix the base first, then reset the pavers.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Paver driveway installation in Tampa runs $7,000 – $18,000 depending on square footage, paver selection, and the amount of base repair needed. Smaller repair jobs, like resetting a section of settled pavers or replacing a cracked edge row, typically fall between $800 and $3,500. Driveway replacement, where we remove the old pavers and rebuild the base, generally lands between $5,000 and $14,000.
| Job Type | Tampa Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Driveway Sealing | $250 – $700 |
| Paver Patio Installation | $3,500 – $11,000 |
What drives the range: paver thickness (80mm costs more than 60mm but is the only correct choice for a driveway), the condition of the existing base, whether we need to remove and haul old concrete or asphalt, and the amount of cut work around curves, planters, or a garage apron. Every estimate includes the pavers, bedding sand, compacted base material, edge restraint, labor, and cleanup. The written price we give you before work starts is the price you pay, which is how Graham Stein has run every Tampa job since day one. “We write it down before we start so nobody is guessing mid-project.”
DIY or Call Us?
You can safely re-sand the joints on a small patio or walkway with polymeric sand from a Tampa building supply store, provided the base is sound and the pavers are not moving. You can also pull a single cracked paver and replace it if you have a matching spare. What is harder to do safely and correctly without the right equipment: recompacting a settled base, re-establishing grade so water drains away from your foundation, and cutting pavers to fit against a curved driveway edge. Those jobs need a plate compactor, a paver saw, and a good read on Tampa’s drainage patterns. If the pavers are rocking, the base is done, and that is where DIY turns into a bigger problem. Call (850) 779-4017 and we will give you a free, written estimate and a straight answer about what actually needs to happen.
FAQs
A properly installed Oldcastle paver driveway in Tampa lasts 25 – 40 years, with the poly sand joints needing reapplication every 3 – 5 years depending on shade, drainage, and pressure-washing frequency. Florida’s UV is hard on colored pavers, so expect gradual fading after year 10. Call (850) 779-4017 for an honest assessment and a free estimate on any paver work in Tampa.
Yes, in most cases we can reset a settled section, replace cracked pavers, and re-sand the joints without touching the rest of the driveway, as long as the surrounding area is still structurally sound. If the base failed in one spot, we will dig down, recompact, and rebuild that section so the repair actually holds. Call (850) 779-4017 and we will tell you if a targeted repair makes sense for your Tampa driveway.
A section repair typically takes 1 – 2 days, while a full paver driveway installation in Tampa runs 3 – 5 days depending on size, access, and whether we are removing an old concrete slab. We will give you a start and completion date in writing so you can plan around kids, pets, and parking. Call (850) 779-4017 for a free, written estimate.
We keep commonly requested Oldcastle paver sizes, edge restraints, bedding sand, and joint sand on hand for repair jobs across Tampa, and we order full paver pallets directly for new installs and larger replacements. If your exact color has been discontinued, we will show you match options before we order anything. Call (850) 779-4017 and we will check availability while you are on the phone.
Written by Graham Stein, Owner, Elmstead Remodeling Tampa at Elmstead Remodeling Tampa, serving Tampa and nearby areas.
