Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Tampa Homeowners Choose Dvele Construction
We provide independent Dvele construction service across Tampa, from whole-home envelope retrofits to kitchen and bath fit-outs in Dvele IQ, Elements, Signature, and ADU-series homes. Our crews know the air-sealing details, the ERV balancing tolerances, and the standing-seam roof flashing points these houses demand in Florida’s climate. What makes our Dvele work different is that we treat the envelope as a system: a remodel in a Dvele home isn’t a standard renovation with higher-end finishes, it’s surgery on a machine that breathes, dehumidifies, and holds pressure. We’re not factory-authorized, and we say so plainly; we’re an independent Tampa Dvele service with hands-on Dvele project experience. Call (850) 779-4017 to talk through what your home needs.
Dvele homes are built to a standard most Tampa contractors never see: continuous air barriers, Zehnder ERVs, triple-glazed windows, steel moment frames. When those systems need service or a family wants to remodel a kitchen without wrecking the envelope, generic construction knowledge falls short. You need a crew that understands what’s behind the drywall. That’s the work we do as your General Contractor.
Key Takeaways
- Independent Dvele construction service in Tampa: envelopes, kitchens, baths, standing-seam metal roofs
- Four Dvele model lines covered: IQ, Elements, Signature, ADU series
- OEM-specified components for structural and mechanical systems only
- Written price before any work starts, every project, always
- Live person answers the phone 24/7 at (850) 779-4017
Why Trust Elmstead Remodeling Tampa for Your Dvele Construction?
Dvele homes are not forgiving of shortcuts. The air barrier is continuous, the fresh-air system is balanced to the cubic foot, and the window frames are engineered to sit flush with the wall assembly. Our crew lead, Graham Stein, learned the trade at Los Angeles Trade-Technical College and spent two decades on projects from single-room additions to full gut renovations before bringing that experience to Tampa. Graham writes a fixed-price scope before a single tool comes off the truck. We write it down before we start so nobody is guessing mid-project.
What our crews bring to a Dvele job is specificity. We know where condensation forms when an ERV’s exhaust filter clogs during Tampa’s summer dew points. We know how low-VOC drywall mud behaves at the seams where steel moment frames meet wall assemblies during hurricane wind uplift. We know which millwork matches Dvele’s original specifications and which third-party equivalents fail the whole-home energy model. We’re not guessing at Dvele. We’ve opened enough walls in these homes to know exactly what we’ll find.
Every Dvele job gets the same Cedarwell Care Promise as any other Elmstead Remodeling project in Tampa: drop cloths on the floors before work starts, shoe covers at the door, quiet tools during family rest hours where possible, pet-safe product choices where available, and a photo of the clean-up before the crew leaves. That isn’t extra. It’s the baseline.
Styles & brands we work with
Common Dvele Construction Problems We Fix in Tampa
Tampa’s climate strains Dvele’s airtight envelopes in specific, predictable ways. Here are the patterns our crews see most often:
- ERV humidity imbalance causing window condensation. Dvele IQ and Signature homes run Zehnder ComfoAir ERVs that remove humidity while exchanging fresh air. During Tampa’s July and August dew-point spikes, a clogged exhaust filter or an unbalanced supply/exhaust ratio pushes indoor humidity past 65%. The result: condensation at the triple-glazed window frames, especially on south-facing glass. The fix is filter replacement plus rebalancing to Dvele’s documented CFM per bedroom, not cranking the AC colder.
- Hidden mold behind kitchen cabinet runs on exterior walls. Dvele’s airtight envelopes handle humidity so well that an undersized whole-home dehumidifier can quietly fail. We’ve opened kitchens in Dvele Elements homes and found mold behind cabinet bases on north and east exterior walls, where the wall cavity’s cooler surface meets humid interior air. The problem isn’t the envelope; it’s that the mechanical dehumidification was specified smaller than Tampa’s wet season requires.
- Wind-driven rain intrusion at roof-to-wall transitions. Dvele’s modern shed designs use standing-seam metal roofs with continuous panels. The weak point is the flashing where roof planes meet stucco or panel walls. Improperly lapped or missing kick-out flashing lets afternoon thunderstorm rain drive into the wall assembly. We repair these transitions by pulling the affected panels, reinstalling properly stepped flashing, and verifying the air barrier continuity beneath.
- Cracking low-VOC drywall mud at steel moment frame junctions. Steel expands and contracts at different rates than wood or concrete. During hurricane wind uplift events, the flex at moment frame connections cracks standard low-VOC drywall mud. We see this most in Dvele Signature homes with large window walls. The repair is not re-taping; it’s installing a flexible sealant joint designed for movement, then refinishing to match the original texture.
- Standing-seam metal roof panel oil-canning and seam separation. Tampa’s near year-round sun heats Dvele’s metal shed roofs to surface temperatures above 150 degrees. Panels expand, then contract as afternoon storms drop the temperature by 30 degrees in ten minutes. Over time, poorly installed seams separate or show visible oil-canning. We inspect the seam tightness, panel gauge, and clip spacing, then repair or replace affected panels to match the existing profile.
Dvele Parts & Our Repair-vs-Replace Approach
We order OEM-specified Dvele components through the homeowner support portal or certified distributors. That includes Zehnder ERV cores, triple-pane glazing units, and structural hardware. We will not substitute an aftermarket part for a structural or mechanical system. For finish materials like millwork, tile, or cabinet hardware that Dvele has discontinued, we source quality equivalents only after verifying they meet the original spec and won’t compromise the home’s energy model or air-sealing.
Repair-versus-replace is a judgment call we make with you, not for you. If a subsystem’s manufacturer warranty is void, or its integration software is no longer supported, repair becomes a recurring bill and we say so. We’ll recommend replacement when it’s the honest answer. For a fast local turnaround, we keep common Dvele-standard filter sets, sealants, flashing profiles, and drywall mud formulations on hand in Tampa. Call (850) 779-4017 and we’ll tell you over the phone whether your issue is a repair we can schedule this week or a replacement we should quote in writing.
Our Dvele Service Process – Step by Step
- 1
Diagnosis with envelope awareness. We start by testing: indoor humidity, ERV duty cycle, window surface temperatures, and flashing conditions. A Dvele home is a system, so we look at the interaction between the envelope, the mechanicals, and the finish surfaces before touching anything.
- 2
Repair or remodel with Dvele-specific technique. Whether we’re rebalancing a Zehnder ERV, reframing a kitchen without compromising the air barrier, or repairing a standing-seam shed roof, we follow Dvele’s documented tolerances. Airtight drywall returns get sealed and taped to the same spec as the original envelope.
- 3
Testing and verification before we call it done. We run the numbers: CFM per bedroom, indoor humidity under load, window surface temps. We don’t leave until the system performs within Dvele’s documented range. If it doesn’t, we adjust and test again.
- 4
Warranty and written record. Every Dvele job includes a written line-item invoice, a photo record of the finished work and the clean-up, and our 365-Day Done Right Promise: if it’s not done right, we make it right. That promise is stamped on every project.
See the difference
Before
After
Before
After
Before
AfterDvele Products We Service & Install in Tampa
We service and install across all four Dvele model lines: Dvele IQ (the smart-home flagship with full automation integration), Dvele Elements (the simplified, cost-conscious line with the same envelope standards), Dvele Signature (the custom line with larger window walls and more complex steel framing), and the Dvele ADU series (accessory dwelling units with the same continuous air barrier and ERV systems). We keep common Dvele-standard filter sets, sealants, flashing profiles, and finish materials in Tampa for faster local turnaround. If you’re planning a Dvele kitchen or bath remodel, we’ll match millwork, tile, and fixtures to the original spec so the new work doesn’t read as an add-on.
We Also Service These Brands
We’re not single-brand dependent, which matters when your Dvele home carries finishes from other manufacturers. Our crews also work with KraftMaid and Wellborn cabinetry, Cambria and Silestone countertops, and Kohler fixtures. If your Dvele remodel calls for a matching millwork profile from a specific line, we know which suppliers to call and which product numbers to order. Multi-brand capability means we can make the whole room work together, not just the envelope.
FAQs – Dvele Construction Service in Tampa
Are you authorized by Dvele?
No. We are an independent Dvele service provider in Tampa. We are not factory-authorized, and we say so plainly. What we have is practical, on-the-ground experience with Dvele’s IQ, Elements, Signature, and ADU lines, including whole-home envelope retrofits and interior fit-outs. We order OEM-specified components through the homeowner support portal or certified distributors, and we follow Dvele’s documented tolerances because they work. Call (850) 779-4017 to discuss your project.
Do you use genuine Dvele or OEM parts?
For structural and mechanical systems, yes, always. We order Zehnder ERV cores, triple-pane glazing units, and structural hardware through Dvele’s homeowner support portal or certified distributors. For discontinued finish materials like specific millwork profiles or tile, we source quality third-party equivalents only after verifying they match original specs and won’t compromise the home’s air sealing or energy model. We’ll tell you which is which before any part goes in.
Will servicing or remodeling in my Dvele home void the manufacturer warranty?
It depends on the specific warranty language and the scope of work. Modifications to the envelope, mechanical systems, or structural components may affect portions of the Dvele warranty. We recommend reviewing your warranty documentation before any remodel, and we’ll flag any work that could have warranty implications before we quote it. Our 365-Day Done Right Promise covers our workmanship regardless.
How do you handle airtight drywall returns when remodeling a Dvele kitchen without compromising the envelope’s air-sealing?
We isolate the work area with temporary air barriers, then rebuild drywall returns to Dvele’s original air-sealing specification. That means proper sealant at the framing connection, taped and mudded seams to the same density as the original envelope, and a blower-door verification before we consider the kitchen complete. The remodeled space must hold air just as tight as it did before we opened the walls.
What’s the most common cause of hidden mold behind Dvele kitchen cabinets on exterior walls in Tampa?
Undersized whole-home dehumidification. Dvele’s envelope does its job too well in Tampa’s wet season: it holds moisture in, and if the dehumidifier isn’t sized for this climate, that moisture condenses on cooler exterior wall cavities behind cabinet runs. The fix is a properly sized dehumidifier on the return plenum, not ripping out cabinets. Call (850) 779-4017 to have us measure your indoor humidity under load and give you a real diagnosis.
Can you repair a Dvele standing seam metal roof without replacing the entire shed roof?
Usually, yes. We repair roof-to-wall transitions, replace damaged or separated panels, and correct flashing details without replacing the entire roof, unless the panel profile is discontinued and a match is impossible. We inspect seam tightness, clip spacing, and panel gauge, then quote a repair that addresses the actual failure point. Get the exact number by calling (850) 779-4017.
How much does Dvele construction service cost in Tampa?
Our most common Dvele-specific services carry these ranges:
| Service | Tampa Price Range |
|---|---|
| Whole-Home Fresh Air System Tune-Up for Dvele Envelopes | $1,200 – $3,500 |
| Dvele-Specific Kitchen Remodel (Airtight Envelope Compatible) | $14,000 – $45,000 |
| Standing Seam Metal Roof Repair for Dvele Shed Designs | $400 – $1,800 |
Exact pricing depends on your home’s model line, the scope, and what we find during diagnosis. We give you a written line-item price before any work starts. Call (850) 779-4017 for a free estimate.
Book Your Dvele Service in Tampa, FL
If you own a Dvele home in Tampa and something isn’t right, or if you’re planning a remodel, start with a phone call to discuss Dvele repair in Clearwater or Tampa. We’ll ask the right questions, schedule a diagnosis if needed, and give you a written price before any work begins. Call (850) 779-4017.
Written by Graham Stein, Owner at Elmstead Remodeling Tampa, serving Tampa since 2005.
