







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with







See the difference
Before
After
Before
After
Before
AfterHow Much Does Bathroom Vanity Installation Cost in Tampa?
Bathroom vanity installation in Tampa typically costs $800 to $3,000 for most homes, with the average project landing around $1,400 to $1,900. Simple vanity swaps with basic plumbing are on the lower end, while custom cabinetry, double-sink configurations, and plumbing rerouting push the price higher. The final number is determined before any work starts, in writing, so there is never a surprise on the back end.
That written price is one thing we do at Elmstead Remodeling that some Tampa contractors will not. You get a line-item quote before the crew arrives, and the number does not change unless you change the scope.

Bathroom Vanity Installation Cost Breakdown (2026)
Here is how a typical vanity installation in Tampa breaks down by component:
| Cost Component | Typical Range (Tampa, 2026) |
|---|---|
| Stock vanity (24″ – 48″, single sink) | $300 – $900 |
| Semi-custom vanity (KraftMaid or Wellborn) | $900 – $2,200 |
| Custom-built vanity | $1,500 – $4,000+ |
| Countertop (cultured marble, quartz, or granite) | $200 – $1,200 |
| Faucet and drain assembly | $100 – $500 |
| Plumbing hookup and minor rerouting | $150 – $500 |
| Removal and disposal of old vanity | $75 – $250 |
| Labor (installation, leveling, sealing) | $300 – $900 |
Those numbers reflect what homeowners across Tampa neighborhoods are paying in 2026. In areas like South Tampa and Davis Islands, where homes skew older and plumbing often needs adjustment to fit modern vanity dimensions, expect the upper portion of those ranges. In newer construction in Westchase or New Tampa, the work is often simpler and faster.
Why the Range Is So Wide
The gap between $800 and $3,000 comes down to three things: the vanity itself, what is behind the wall, and whether the plumbing moves. A stock 30-inch vanity with a pre-attached top and a faucet that reuses the existing shut-off valves is an $800 to $1,100 job. A double-sink vanity with Cambria quartz countertops, a Grohe faucet, and plumbing that has to shift six inches to accommodate the new footprint is a $2,500 to $3,000 job, and sometimes more if the drain line needs work.
Tampa’s older housing stock matters here. Homes built in the 1950s through the 1970s in neighborhoods like Seminole Heights, Palma Ceia, and Carrollwood frequently have supply lines and drain locations that do not match the plumbing cutouts on modern vanities. A plumber has to adjust or move those lines, which adds labor but prevents a leak behind a brand-new cabinet six months later.
What Affects Bathroom Vanity Installation Pricing in Tampa
- Vanity size and configuration. A single-sink 30-inch vanity is the least expensive to install. A 60-inch double-sink vanity requires two supply lines, two drain connections, and a longer countertop, which pushes labor and material costs up.
- Material of the countertop. Cultured marble is the most affordable surface. Quartz from Cambria or Silestone runs higher but resists staining from toothpaste and soap far better, which matters in a bathroom used daily by children.
- Plumbing condition and location. If the existing shut-off valves are corroded, or if the drain line is not centered for the new vanity, the plumber has to make adjustments. Homes in Tampa with cast-iron drain lines from the mid-century era often need an adapter or a section of pipe replaced.
- Whether the flooring runs under the old vanity. If the old vanity sits on top of the tile and the new one has a different footprint, exposed subfloor may need patching or new tile. This is common when swapping a 48-inch vanity for a 36-inch one.
- Wall repair and paint matching. Removing an old vanity often reveals unpainted drywall, old adhesive, or a slightly different wall color. Patching and touching up those areas keeps the room looking finished.
- Access and floor level. A second-floor bathroom in a Bayshore townhome with a narrow stairwell takes longer for the crew to navigate than a first-floor bathroom with a straight shot from the driveway. Labor accounts for that.

Vanity Types and What They Cost in Tampa
The vanity itself is the single largest material cost, and the type you choose determines a large share of the total project price.
Stock Vanities: $300 – $900
Stock vanities come in standard widths like 24, 30, 36, and 48 inches. They are built on an assembly line and shipped flat or pre-assembled. The cabinets are usually particleboard with a laminate or thermofoil front. They are perfectly functional, and for a guest bathroom or a children’s bathroom, they are often the right call.
Semi-Custom Vanities: $900 – $2,200
This is where brands like KraftMaid and Wellborn come in. Semi-custom means you choose the door style, finish, hardware location, and drawer configuration from a defined set of options. The cabinet box is typically plywood rather than particleboard, which holds up better in Tampa’s humid months. Families with children and pets tend to prefer plywood boxes because they resist swelling when a kid splashes water on the cabinet face every bath night.
Custom Vanities: $1,500 – $4,000+
A custom vanity is built to the exact inch of your bathroom. It makes sense when the space has an odd dimension, when you want a specific storage layout for a particular use, or when the vanity needs to match existing cabinetry in the home. Custom work takes longer, which is reflected in the price.
Labor Costs in the Tampa Market
Plumbing labor in Tampa for a straightforward vanity swap runs $150 to $350. That covers disconnecting the old supply lines and drain, setting the new vanity, reconnecting everything, and testing for leaks. If the drain needs to move more than a few inches, or if the shut-off valves need replacement, labor can rise to $500 or more.
Carpentry and finish labor runs $150 to $450 depending on whether the vanity needs shimming to sit level on an uneven floor, whether trim or baseboard has to be cut to fit, and whether the wall needs patching. Older Tampa homes with settled slab foundations often have slightly out-of-level floors, and a good installer takes the time to shim the cabinet so the doors hang true.
Materials: What You Are Actually Paying For
Beyond the vanity and countertop, a complete installation includes:
- Faucet and drain assembly. A Moen or Kohler faucet with a metal drain runs $100 to $500. These brands carry manufacturer warranties that homeowners can verify independently.
- Supply lines and shut-off valves. Replacing old angle stops and braided supply lines costs $20 to $80 and is worth doing every time the vanity comes out.
- Caulk and sealant. A mildew-resistant silicone caulk around the countertop and backsplash is $10 to $30 in material and prevents water from seeping behind the cabinet.
- P-trap and drain extension. $15 to $50 depending on whether the existing trap can be reused.
How to Save on Bathroom Vanity Installation
The easiest way to lower the cost is to keep the plumbing where it is. Choosing a vanity with a sink centered over the existing drain location eliminates the most expensive labor line item. The second easiest way is to choose a stock or semi-custom vanity rather than a custom build. A KraftMaid semi-custom vanity with a quartz top delivers durability and a clean look at roughly half the price of full custom.
Doing the demolition yourself is an option some homeowners choose, but it rarely saves meaningful money and can create extra repair work if a supply line is damaged or the wall gets gouged. The removal and disposal line item is usually $75 to $250, which is a small portion of the total.
The most reliable way to control cost is to get a written price before any work starts. That is a standard part of every vanity installation we do in Tampa. The number on the quote is the number on the invoice, unless the scope changes with your approval. If you want to talk through options and get numbers for your specific bathroom, call (850) 779-4017. A live person answers, day or night.
What Elmstead Remodeling Does Differently
We are a Cedarwell company, and every project carries the Cedarwell Care Promise. For a vanity installation, that means the crew lays drop cloths on the floors before the old vanity comes out, wears shoe covers at the door every time they walk in, and runs quiet tools during children’s sleep hours where the schedule allows. If there is a pet in the house, we use pet-safe products where there is a choice.
Before the crew leaves, we take a photo of the clean-up and show it to you. The old vanity is hauled away, the floor is swept, and the bathroom is left usable. And the work is covered by our 365-Day Done Right Promise: if it is not done right after the project is complete, we make it right. That promise is stamped on every project, and it is the longest-standing post-project commitment in our service area.
Graham Stein leads our Tampa team, and every technician who walks through your door is background-checked and uniformed, so you know exactly who is in your home.
FAQs – Bathroom Vanity Installation Cost
Is it cheaper to repair or replace a bathroom vanity?
If the cabinet box is solid and the only issue is a worn countertop or a drippy faucet, repairing runs $150 to $600. If the cabinet itself is water-damaged or the drawer slides are failing, replacement is usually the better value: $800 to $3,000 gets you a vanity that will last 20 years rather than patching one that is already failing. Call (850) 779-4017 for an honest read on which direction makes sense for your bathroom.
How long does bathroom vanity installation take in Tampa?
A simple single-sink vanity swap takes 4 to 6 hours, including removal, plumbing, and clean-up. A double-sink vanity with plumbing adjustments takes one to two days. We schedule the work around your family’s routines, and the written quote includes the timeline.
Can you install a bathroom vanity in one day?
Yes, in most cases. If the plumbing does not move and the vanity is a standard size, the job is done the same day, with the bathroom fully functional before the crew leaves. Custom vanities or plumbing reroutes may require a second visit for the countertop install.
What does it cost to replace just the vanity top?
A new countertop with a sink and faucet on the existing cabinet typically runs $500 to $1,500 in Tampa, depending on material. Cambria or Silestone quartz tops with an integrated sink are at the higher end; cultured marble is at the lower end.
Do I need a permit to install a bathroom vanity in Tampa?
Most vanity swaps do not require a permit because they do not change the plumbing layout. If the job involves moving a drain line or adding a new supply line, a permit may be required, and we handle that as part of the written scope. Call (850) 779-4017 and we will tell you up front whether your specific project needs one.
Get a Written Price for Your Tampa Vanity Installation
Pricing for bathroom vanity installation in Tampa ranges from $800 to $3,000, and the only way to know where your project falls is to have someone look at the actual bathroom. We give a written price before any work starts, every time, on every project. No estimate that grows after the crew arrives.
Call (850) 779-4017 and a live person will answer, 24 hours a day. We will talk through your vanity options, the plumbing situation in your home, and what the job will cost. Then you can decide with a firm number in hand.
Pricing reflects the Tampa market as of 2026. Elmstead Remodeling Tampa offers free estimates – call (850) 779-4017.
Written by Graham Stein, Owner at Elmstead Remodeling Tampa, serving Tampa since 2005.
What Our Customers Say
"Two bathrooms done at once with kids and a dog in the house. They kept dust contained, were gentle with the pets, and left the place clean each day. Calm and careful."
- Paige Lindholm"Redid our main bath. They protected the hallway and carpet the whole way to the bathroom and vacuumed daily. Quiet during the baby's naps when they could be. Lovely finish."
- Harold Nussbaum"Main bath gut and redo. They protected the carpet the whole way down the hall and vacuumed daily. Quiet during naps when they could be. Lovely finish."
- Franklin Mbeki












