Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ActiveYards Fence Installation: The Tampa Owner’s Guide
ActiveYards fence installation in Tampa typically runs $3,500 to $9,000 for a full perimeter install, depending on linear footage, style line, and gate count. If you already own the ActiveYards product and a section or gate has failed, we can usually match the profile and color on-site and write you a fixed price before any work starts. Most Tampa homeowners discover the problem the hard way: a gate that starts dragging after a storm, a post that leans after the summer rains soften the ground, or a picket that cracked when the kids hit it with a bike.
The good news is ActiveYards uses a modular aluminum and vinyl post-and-rail system, which means a failed section rarely requires tearing out the whole run. We stock common ActiveYards posts, rails, pickets, and gate hardware in our Tampa service area, and Graham Stein can usually identify the exact series from a photo before the crew even rolls out. If you’re calling about one leaning post or a sagging gate, the fix is often smaller than the full-install range above.
Which ActiveYards Models This Applies To
ActiveYards builds its fence systems around a few distinct lines, and the parts do not always cross between them. The most common in Tampa are the Chesapeake, Potomac, and Meridian lines, each with different post dimensions, rail profiles, and picket spacing. Chesapeake uses thicker posts with a more traditional look; Potomac runs a slimmer profile that some HOAs in the Westchase and FishHawk areas prefer; Meridian is the budget-conscious aluminum line. Before you order anything, flip a picket or check the gate frame for a stamped label or laser-etched code. If the label is gone, measure the picket width and the post cap opening: Chesapeake posts take a 2″ x 2″ cap, Potomac runs slightly narrower.
On the OEM-versus-aftermarket question: activeYards OEM parts carry the factory powder-coat warranty and match your existing color exactly. Quality aftermarket posts and rails from a machine shop will save money, but the shade of white, almond, or tan rarely matches after two years of Florida sun fade. For visible sections, we recommend OEM. For buried post components inside a concrete footing, a heavy-gauge aftermarket post sleeve is functionally identical and costs less. We’ll show you both numbers and let you choose. Elmstead Remodeling Tampa is an independent installer, not an ActiveYards dealer, which means we have no incentive to push one option over the other.
Styles & brands we work with
Signs Your ActiveYards Fence Installation Is Failing
- Gate drags or won’t latch. This usually means the post has shifted out of plumb or the hinge screws have stripped. In Tampa’s sandy, shifting soil, posts set in shallow concrete work loose faster than owners expect.
- Pickets cracking at the bottom rail. ActiveYards pickets are designed to float inside the rail to allow thermal expansion, but if a rail was over-tightened at install, the pickets bind and crack. This is a workmanship failure, not a material failure.
- White or tan finish chalking or streaking. Florida UV and humidity age the powder coat faster here than in most of the country. Chalking alone is cosmetic, but if you see bare aluminum exposed, the section needs replacement before pitting starts.
- Post leaning after heavy rain. The summer downpours saturate Tampa soil and hydrostatic pressure pushes under shallow footings. A post that leans more than half an inch at the top is going to keep moving.
- Gate frame separating at the corners. ActiveYards gates are assembled with corner brackets that can pull loose over thousands of open-close cycles, especially if the gate was hung a little heavy on the hinge side.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a full ActiveYards fence installation in Tampa, the honest range is $3,500 to $9,000, and the spread comes down to three things: linear feet, series choice, and how many gates are involved. A single gate adds $400 to $900 installed, and a double-drive gate runs $800 to $1,500, depending on operator hardware. If you’re replacing a failed section rather than the whole perimeter, a typical 8-foot panel swap with a new post and concrete footing lands between $500 and $900.
Every quote includes the line-item cost of parts, the labor rate, the concrete and post mix, and any gate hardware. You get the written price before we start, per Graham’s habit of putting everything on paper so nobody is guessing mid-project. The 365-Day Done Right Promise covers the install work, and the ActiveYards factory warranty covers the material. If a post shifts within the year, we come back and reset it.
DIY or Call Us?
ActiveYards components are light enough that a homeowner with a post-hole digger can swap a picket or re-set a gate latch without help. Those are fair DIY jobs. What we would not recommend doing yourself is anything involving a post set in concrete: removing the old footing, digging to the right depth for Tampa soil conditions, and setting the new post plumb enough that the gate still swings true in August is work that is easy to get wrong by half an inch and costly to fix after the concrete cures. The same goes for a double-drive gate with an opener, where spring tension and sensor alignment need to be right the first time.
If you have checked the hinge screws and the latch alignment and the gate still drags, the problem is most likely below the ground, not above it. Call (850) 779-4017 and we’ll come out, measure it, and give you the fixed price before anything is touched.
FAQs
An ActiveYards aluminum fence installed with proper post depth in concrete lasts 20+ years in the Tampa climate. The vinyl lines typically reach 15 to 20 years before serious chalking or brittle failure, with white finishes holding up best.
Sometimes, yes. If the post is moving because the concrete puck is tipping in soft soil, we can expose the footing, lift the post back to plumb, and add a wider collar of concrete around it. If the post itself is bent or the footing is cracked, replacement is faster and cheaper than trying to save it. Call (850) 779-4017 and we’ll tell you which one you have.
A full perimeter for a typical Tampa lot takes two to three days, including concrete cure time before gates are hung. A single post replacement or panel swap is typically a half-day visit.
We keep common ActiveYards posts, rails, pickets, gate hinges, and latch sets stocked for Chesapeake and Potomac lines, along with Meridian hardware. Less common colors or special-order profiles take about a week. Send us a photo of the fence and we’ll confirm before the crew drives out.
If you have a failed section, a dragging gate, or a whole yard to fence, call (850) 779-4017 for a free estimate. We answer the phone with a live person, we write the price down before we start so nobody is guessing mid-project, and we leave the yard cleaner than we found it.
Written by Graham Stein, Owner, Elmstead Remodeling Tampa at Elmstead Remodeling Tampa, serving Tampa and nearby areas.
